|
Post by Old Techo on Mar 30, 2023 18:29:49 GMT 10
|
|
|
Post by jr on Mar 31, 2023 10:45:54 GMT 10
Very interesting video OT, I was not aware of some of the strict rules they have to work under and to get close to 50% efficiency is impressive. That generator on the turbo to work as a waste gate is another thing to assist acceleration, I hope they don’t put them on normal vehicles as the cost would be enormous. JR
|
|
|
Post by jr on Apr 1, 2023 8:34:10 GMT 10
Just another thought on that generator waste gate control, Those turbo’s run at over 400,000 RPM so must be a hell of a generator to handle that kind of speed. Maybe goes through some kind of speed reduction system and the rotor is a very small dia. JR
|
|
|
Post by spaceland on Apr 1, 2023 11:01:03 GMT 10
That 400,000 rpm equates to 6,666 Hz. A six pole generator/motor would thus work at a maximum of less than 20 kHz. There are plenty of materials to construct a unit from that will operate at those frequencies. The gene/motor would be just a small blister on the shaft.
|
|